Yakima Roof Bike Racks Review - 2020 Mitsubishi Outlander Sport- Video
Hey, everybody. Welcome to etrailer.com. I'm Bobby. And today we're taking a look at the Yakima high road single bike platform carrier on our 2020 Mitsubishi Outlander sport. Now this can be an awesome way of getting our bikes up on our roof and onto the road with us. As you can see today, big thing with this maybe we don't have a hitch. more
5/10/2021 4:28:30 PM
RockyMounts TieRod Roof Bike Rack Review - 2008 Mitsubishi Outlander- Video
Today on our 2008 Mitsubishi Outlander we'll be test fitting the RockyMounts TieRod Roof Mounted Bike Carrier, part number rky1014. To begin our test fit we'll go ahead and place our carrier on top of our load bars. We'll bring around the rubber coated steel straps to the front, fit them into position and then use the Allen key to secure the front part our carrier to the front load bar.Then we want to move to the rear and fit our bracket around our rear load bar. Then we use the wing nuts to tighten down that bracket and secure our rear part of the carrier to our rear load bar. Now we need to go ahead and make sure the skewer at the front of the carrier is open and that the rear strap at the rear is open as well. We'll grab our bike, place it into the wheel cradle and drop the front fork down into the skewer.We'll secure first by tightening the skewer and then we'll move to the rear of the carrier and use the wheel strap to tighten our real wheel. more
5/13/2013 11:18:39 AM
Yakima FrontLoader Roof Bike Rack Review - 2012 Mitsubishi Eclipse- Video
Today on the 2012 Mitsubishi Eclipse were going to do a test fit of part #: y02103 from Yakima, the front loader wheel mount bike carrier. Now our car has been already equipped with the Yakima roof rack, so all we got to do is put a bike rack on top of that. well take the front half of the bike rack and put it onto the front crossbar, then well go ahead and clamp it down, but leaving it loose so we can go ahead and move the back clamp into place as well. Once we have it loosely installed well go ahead and move it around to its final position and make sure its straight with the car, and then we can go ahead and tighten down the clamps. With those two clamps our bike rack is already installed. So at this point we can go ahead and load up a bike. more
2/27/2012 12:44:44 PM
RockyMounts TieRod Roof Bike Rack Review - 2012 Mitsubishi Eclipse- Video
Today on this 2012 Mitsubishi Eclipse, we're going to be test fitting the RockyMounts TieRod Roof Mounted Bike Carrier, part number RKY1014. First, we'll lift the carrier up on top of our roof rack. We'll center the head of the carrier on top of our front crossbar. We'll pull the straps around and secure them back to the head. Once we've done that, we can use an Allen wrench to tighten the bolt on the front of the head to tighten the front straps. Then we'll snap the front cover back into place. more
2/21/2012 1:26:05 PM
Yakima FrontLoader Roof Bike Rack Review - 2011 Mitsubishi Endeavor- Video
Today on this 2011 Mitsubishi Endeavor we are going to do a test fit of part number Y02103 from Yakima. This is a FrontLoader wheel mount bike carrier. Now our vehicle has already been outfitted with our Yakima roof rack system and were going to install our bicycle carrier already assembled according to instructions. So it is just a matter of installing it on our roof rack. We will go ahead and open up the clamp. For the first crossbar, go through the front. We will put that in place and then slide our second clamp into place for the cross bar in the back. Once we have had it located on the bars, we will make sure that they are secure on the vehicle roof rack. We can then go ahead and tighten them down. more
12/20/2011 6:03:25 AM
Filter Videos
Filter Videos
